GW Instek GDS-1072B Digital Storage Oscilloscope

Features :
– 50/70/100MHz bandwidth selections, 2ch or 4ch input
– 1GSa/s maximum sampling rate
– 10M maximum memory depth for each channel
– 7” 800 x 480 WVGA LCD display
– 256 color gradient display function to strengthen waveform performance
– 1Mpts FFT frequency domain signal display
– Zero Key function for horizontal time, vertical voltage and triggering
– Compact and innovative exterior design

Description

Details

The GW Instek GDS-1072B is a 2-channel oscilloscope with 70MHz of bandwidth and comes from the GDS-1000B series. The oscilloscopes in this series from GW Instek offer a lot of value for money; they have a large color screen, a deep memory and a high capturerate. It’s not for nothing that they are called the rival of the famous Rigol DS-1000Z series.

Measurements

With the built-in voltage meter it is possible to get a 3 digit display of RMS values, there is also a 5 digit frequency meter available. It is possible to display 8 measurements at the same time on the screen, it is also possible to display 36 measurements at the same time in a pop-up.

Filtering

The GDS scopes offer the possibility to perform digital filtering on the signal. This makes it possible to display the signal without unavoidable background noise, or unwanted signal components. The signal can be filtered with a high or low pass filter and this can be done on a channel by channel basis.

Dual-display

With the dual-display function, both the entire signal and a zoomed part of it can be displayed simultaneously. It is also possible to display a Lissajous figure in an X-Y plot.

Connections

The oscilloscopes can be connected to a computer with USB and LAN to store the measured data over a longer period of time. For example, with a minimum interval of 5 seconds, it is possible to store the measured waveforms in CSV format to a USB stick or a computer connected via LAN for up to 100 hours.

Specifications

Memory	10 Mpts per channel
Maximum sampling rate	1 GSa/s
Display	7″ TFT, 800×480 pixels
Input impedance	1 MΩ // 16 pF
Horizontal scale	1 ns/div – 100s/div
Vertical resolution	1 mV/div – 10 V/div
Measured noise value	500 – 800 µV_pp (at 25µs, 1mV/div, record length: 10K)
A/D converter	8 bits resolution
Maximum voltage	300V RMS, CAT I
Waveform capture rate	up to 50,000 wfm/s
Connections	2.0 USB (Host/device), LAN, Pass/fail output
Weight (without box)	2.8 kg
Dimensions	380 x 127.3 x 208 mm (LxWxH)

Accessories

All oscilloscopes from the GDS-1000B series are supplied including:

Quick start guide
Manual
Power cord
Probes, 1 per channel, 70/100 MHz depending on model

Downloads

GDS-1000B series manual	(7.73 MB)	Download

Additional information

Weight	7 kg

Reviews

There are no reviews yet.

Be the first to review “GW Instek GDS-1072B Digital Storage Oscilloscope”